CO2 Insufflation Device for Endoscopy Equipment – ENCO 2 30L with Air

Insufflation Pressure    : 0 – 30 mm Hg.
Dimension ( W x H x D )    : 290 mm x 110 mm x 300 mm.
Weight    : 4 Kg.
Gas : CO2 ( Medical ) + Air.
Gas Connection    : UNF 7 / 16″.
Power Consumption : 15 Watts Maximum.
Input Pressure Minimum    : 1 Bar.
Input Pressure Maximum    : 10 Bar.
Output Connection : 4 to 5 mm ID Tube.
Flow Rate Setting : 1 to 30 Ltr / min.
Keyboard : Feature Touch.
Gas Warmer : Builtin.
Manufactured and tested    : IEC 601-1 / EN 60601-1.
Input Supply Voltage : 230 VAC + 15% 50/60 Hz ( 110 V Optional ).

Advance FLow Control :
The Enertech CO2 Insufflators stands for AFC ( Advance Flow Control Insufflations ) for precise and safe gas flow control.
    
Software :
It’s “intelligent” software controlled pressure release mechanism prevents dangerous pressure build up in the abdomen when using such apparatus as laser or argon beamers.
    
Safety :
Automatic self check, activated each time unit is switched on, make sure all electronic and pneumatic components are in good running order.
    Inbuilt System Gas Heater :
The unit comes with built in high efficiency gas heater. The gas heater is pre adjusted and works on plug and play basis fully automatically.
    Real Time Data Display :
LED 7 segment display for set pressure, actual pressure set volume, Gas Consumption volume, start stop LED and fault.
 

Silicon Patient Tube with Connector : 1 No.
Intel Pressure Regulator : 1 No.
High Pressure Inlet Tube : 1 No.
Spanner    : 1 No.